• Polyurethane Tubing 1 4
    This small PU pneumatic tube is used with push-in fittings, valve panels, cylinders, and equipment air lines where the tube outside surface must seal cleanly inside the connector.
    The tube...
  • 8mm Pu Pipe
    This 8 mm PU tube is made for pneumatic cabinets, valve blocks, cylinders, and compact equipment air lines. Its job is to enter the push-in fitting cleanly and hold air after the panel is...
  • Polyurethane Soaker Hose
    VANSER supplies polyurethane soaker hose for low-pressure seepage watering lines, project length coils, connector-end orders, and separated packing.
    Seepage Wall Check: Hose wall structure...
  • 3 8 Polyurethane Air Hose
    This pu air pipe is used in pneumatic circuits where valve blocks, cylinders, manifolds, and machine air routes need a light tube with a clean outside surface for fittings.
    The outside...
  • Pu Air Pipe
    VANSER supplies pu air pipe for pneumatic circuits, machine air routing, push-in fitting lines, and metric or inch size stock supply.
    OD Surface Control: Outside diameter and surface finish...
  • Polyurethane Recoil Hose
    This coiled PU air hose is used at compressed-air tool stations where the line must stretch during work, return after release, and stay off the bench or floor.
    The spiral body recovers...
  • Clear Polyurethane Hose
    This clear polyurethane hose is used on equipment lines where operators need to see bubbles, cloudy sections, dirt, or flow change without removing a cover.
    The transparent wall gives a...
  • Reinforced Polyurethane Hose
    This reinforced PU hose is used on machine-side compressed-air lines where a plain PU tube may wear too quickly at clips, frame openings, guide plates, or fixture routes.
    The reinforced wall...
  • Pu Tube Fitting
    This compact pneumatic connector is used in air control panels, valve blocks, cylinders, and small machine circuits where a PU tube must enter cleanly and leave the port in the right...
  • Pu Hose Connector
    This pu hose connector is used to join polyurethane hose ends, repair short pneumatic hose lines, or add a straight, barbed, threaded, or insert-style connection.
    The connector body gives...
  • Pu Elbow
    This pu elbow is used where a pneumatic tube needs to turn near a valve port, cylinder, manifold, or panel wall without forcing the tube into a sharp bend.
    The elbow body gives the tube a...

As one of the most professional polyurethane tubing manufacturers and suppliers in China, we have established a stable global sales network and maintained long-term partnerships with industrial clients worldwide. We warmly welcome you to wholesale bulk high quality polyurethane tubing at competitive price from our factory.

Send Inquiry