AS568 O Ring

Send Inquiry
AS568 O Ring
Details
AS568 O Rings manufactured to SAE inch-size standards for hydraulic equipment, industrial machinery, and replacement parts programs.
Dash Number Ordering: Buyers can quote by -010, -214, -325, or other AS568 codes instead of redrawing every size.
Inch-Size Control: The dash number fixes ID and cross section for standard groove matching.
Kit and Stock Supply: Mixed dash numbers can be packed by label, bag, box, or buyer part number.
Compound Review: Keep the same material only when fluid, temperature, pressure, and groove condition remain unchanged.
Factory MOQ: Usually from 1,000 pcs per dash size; mixed dash-number orders are quoted by list.
Category
O Ring
Share to
Description

Technical Specifications

 

 

Item

Factory Specification

Product Name

AS568 o ring

Standard

AS568 / SAE inch-size O ring standard

Size Code

AS568 dash numbers, including common -001 to -475 series

Dimension Basis

ID, CS, OD; OD = ID + 2 × CS

Cross Section Range

Approx. 0.040 in to 0.275 in

Inside Diameter Range

Approx. 0.029 in to 26 in

Materials

NBR, HNBR, EPDM, FKM, VMQ silicone, FVMQ, CR, PU

Hardness

30–90 Shore A, common tolerance ±5 Shore A

Application Type

Static seal, dynamic seal, face seal, radial seal, axial seal after review

MOQ

Usually from 1,000 pcs per dash size; mixed dash-number orders quoted by list

Packing

PE bag, inner box, export carton, bulk packing, OEM label

 

colored rubber o ring materials
water resistant rubber seal ring

 

Product Overview

 

 

AS568 o ring orders are usually straightforward when the dash number is correct. A buyer sends the size code, and VANSER can check the matching ID and cross section under the inch-size standard. This is useful for distributor shelves, repair kits, hydraulic adapters, pneumatic parts, and OEM spare parts programs.

 

The dash number only confirms size. It does not confirm rubber material. If the seal is moved from oil to water, from room temperature to heat, or from a static groove to a moving part, the compound and hardness need to be reviewed again.

 

automotive component rubber seals
hydraulic pneumatic sealing rings

 

Dash Number for Size Control

 

 

For small inch O rings, two parts can look almost identical on the table but behave differently in the groove. A wrong cross section can cause loose squeeze, rolling during installation, or leakage after pressure cycling. Using the AS568 dash number reduces this risk for repeat orders and mixed-size kits.

 

If the buyer does not know the dash number, VANSER can work from ID × CS, groove size, or an application drawing. We first match the nearest standard inch size, then confirm whether an existing mold can be used.

 

rubber o ring production workshop

rubber o rings in labeled bags
IATF 16949 certified rubber products factory

 

Technical FAQ

 

 

Which dash number should I provide when ordering?

Please provide the AS568 dash number if available, such as -010, -214, or -325. If the dash number is unknown, send the inside diameter, cross section, groove size, and application drawing. VANSER will match the nearest standard size before quotation.

Can the same dash number be used in static and dynamic positions?

The size may be the same, but material and hardness still need review. Static grooves mainly depend on compression and medium. Dynamic positions require surface finish, lubrication, speed, wear resistance, and extrusion gap checks.

What hardness is common for standard inch O rings?

70 Shore A is common for general industrial sealing. 90 Shore A is reviewed when extrusion risk is higher. Softer grades, such as 50 or 60 Shore A, may be used for low-pressure grooves or positions needing easier compression.

 

Ordering Information

 

 

Send the AS568 dash number or ID × CS size, material, hardness, working medium, temperature, pressure, application type, quantity, and packing method. For mixed dash-number orders, include quantity per dash size and label format.

 

O-ring material
O-ring quality inspection
O-ring Factory Collection
O-ring Factory Collection
O-ring Factory Collection
O-ring Factory Collection

Hot Tags: as568 o ring, China as568 o ring manufacturers, suppliers, factory

Send Inquiry