• Hydraulic & Pneumatic System Seals And Components
  • Seals And Gaskets For Pumps, Valves & Fluid Systems
  • Rubber Mounts, Bushings & Silicone Hoses For Engine Systems
  • Rubber Vibration Mounts & Pads For Industrial Machinery

Hydraulic & Pneumatic System Seals and Components

Hydraulic and pneumatic equipment uses sealing and connection components at cylinders, valves, manifolds and pipe connections. The right components depend on the equipment design, working medium, pressure, temperature and required dimensions.

 

VANSER supplies O-rings, sealing rings, seal kits, PU tubing and pneumatic fittings for a range of hydraulic and pneumatic applications. Understanding where each component is used helps you identify the right product for your equipment.

Components for Hydraulic Equipment

 

Hydraulic systems use pressurized fluid to transmit force and operate machinery. Sealing components are fitted at designated sealing points to help prevent fluid leakage and maintain system performance.

Depending on the equipment design, relevant products may include:

  • O-Rings and Sealing Rings: Used at specified sealing points in hydraulic equipment. Dimensions, material and hardness must match the application.
  • Hydraulic Seal Kits: Used for maintenance and seal replacement when the kit matches the equipment model and required parts.
  • Gaskets: Used at suitable joints and interfaces where the connection design calls for a gasket.

When selecting a replacement, check the original part number, dimensions and equipment requirements whenever possible. A seal that looks similar may not be suitable for the same pressure, fluid or operating conditions.

Components for Pneumatic Equipment

 

Pneumatic systems use compressed air to operate cylinders, valves and other automation equipment. Seals help contain air at designated sealing points, while tubing and fittings connect components throughout the system.

Common products include:

  • O-Rings and Sealing Rings: For suitable sealing positions in pneumatic components.
  • PU Tubing: For compressed-air lines where the tubing material and pressure rating meet the application requirements.
  • Pneumatic Fittings: For connecting tubing to cylinders, valves and other compatible components.

When ordering pneumatic tubing and fittings, confirm the tube outside diameter, fitting connection type, thread specification and working pressure. Compatibility between the tube and fitting is essential for a suitable connection.

How to Choose the Right Components

 

Before selecting a seal or connection component, check the following information:

Dimensions and Standard

Provide the part number, standard, drawing or measured dimensions. For O-rings, the inside diameter and cross-section are important.

Material and Hardness

Material selection depends on the working medium, temperature and other service conditions. Hardness and the specific material grade may also affect suitability.

Operating Conditions

Confirm the working pressure, temperature range and the fluid or gas in contact with the component. For seals, the sealing position and whether the application involves static or dynamic movement can also matter.

Equipment and Application

Provide the equipment model, component location or original part reference. This information helps narrow down the product options and identify missing specifications.

 

Request a Quote

 

To help us review your requirements, please provide as much of the following information as available:

  • Product name or part number
  • Dimensions, drawing or sample details
  • Material and hardness requirements
  • Equipment model and application
  • Working pressure, temperature and medium
  • Required quantity

If you do not have a complete specification, you can start with the equipment model, existing part number, measurements or clear photographs of the component. We can review the information and identify what additional details may be needed before quotation.

Related Products

 

Explore the product categories relevant to your application:

  • O-Rings & Rubber Seals - for suitable sealing applications
  • Seal Kits - for maintenance and replacement requirements
  • PU Tubing & Pneumatic Fittings - for compatible pneumatic connections
  • Need help identifying a component?

Send us your drawing, part number, dimensions or application details to discuss your requirements and request a quotation.

1

2

3

Seals and Gaskets for Pumps, Valves & Fluid Systems

Pumps, valves and pipework use sealing components at selected joints and connection points. The right product depends on the joint design, the fluid being handled and the operating conditions.

 

VANSER offers O-rings and gasket products for suitable industrial applications. Understanding the sealing position and the equipment requirements is the first step in identifying a suitable component.

Where Are Seals Used in Pumps and Valves?

 

Pumps

O-rings and gaskets may be used at pump housings, covers, ports and flanged connections where the equipment design calls for them. The required seal type depends on the joint structure and the conditions inside the system.

Valves

Sealing components are used at designated interfaces within valves, including suitable covers, ports and body connections. Dimensions, material compatibility and the original valve design should be checked before selecting a replacement.

Pipes and Flanges

Gaskets are commonly used between compatible flange faces to seal the joint. O-rings are used in connections designed with the appropriate sealing groove or seat. The two products are not interchangeable; the connection design determines which type is required.

Choosing the Right Sealing Product

 

Different connection designs call for different sealing components.

O-Rings

O-rings are used in designated grooves and sealing positions in pumps, valves and related equipment. The inside diameter, cross-section, material and hardness should match the application requirements.

Rubber Gaskets

Rubber gaskets are used between suitable mating surfaces where a flat gasket is specified. The material must be compatible with the fluid, temperature and pressure conditions.

PTFE and Other Gasket Types

PTFE and other gasket materials may be suitable for particular fluid systems and joint designs. Material selection should be based on the actual service conditions and the requirements of the connection, rather than the material name alone.

What Information Is Needed for a Replacement?

 

If you are sourcing replacement seals or gaskets, the following details can help identify the correct product:

  • Equipment information: Pump or valve model, manufacturer reference or original part number.
  • Dimensions: O-ring inside diameter and cross-section, or gasket inside diameter, outside diameter and thickness.
  • Connection details: Flange standard, joint configuration, sealing groove or drawing, where applicable.
  • Operating conditions: Fluid or chemical medium, working temperature and pressure.
  • Material requirements: Specified rubber or gasket material, hardness or other required properties.
  • Quantity: Required order quantity and whether samples are needed first.

If the original specification is unavailable, a drawing, sample or clear photographs with measured dimensions can provide a useful starting point. Final suitability still needs to be checked against the equipment design and operating conditions.

Request a Quote

 

Send us your equipment model, part number, drawing or dimensional requirements, together with the expected quantity and operating conditions where available.

We can review the information provided and identify any additional details needed to assess the product requirements before quotation.

Related Products

 

Explore the relevant product categories:

  • O-Rings & Rubber Seals --- for suitable sealing positions in pumps, valves and other equipment.
  • Gaskets --- for compatible flange joints and other connections designed for gasket sealing.
  • Looking for a replacement seal or gasket?

Share your specifications or existing part details to discuss your requirements and request a quotation.

1

2

Rubber Mounts, Bushings & Silicone Hoses for Engine Systems

Rubber components serve different purposes in automotive and engine systems. Rubber mounts help isolate vibration, bushings support connections between moving parts, and silicone hoses are used for specified air or fluid routing applications.

 

Choosing a suitable replacement involves more than matching the general shape. Dimensions, mounting points, material and operating conditions all affect whether a component fits and performs as required.

Common Rubber Components in Engine Systems

 

Engine Mounts and Rubber Mounts

Engine mounts support an engine or other equipment while helping reduce vibration transmitted to the surrounding structure. The correct mount depends on the equipment, load and mounting arrangement.

When sourcing a replacement, check the overall height, mounting dimensions, bolt or stud positions, and specified load requirements. A mount that looks similar may have a different load rating or mounting configuration.

Rubber Bushings

Rubber bushings are fitted between connected components to provide cushioning and accommodate the movement allowed by the design. They are used in various mechanical and vehicle assemblies.

Important details include the inner and outer diameters, overall length, sleeve dimensions, rubber hardness and mounting arrangement. If the original part includes metal sleeves or bonded components, these details should also be checked.

Silicone Hoses and Intake Hoses

Silicone hoses are used in specified engine and vehicle applications, including suitable intake, vacuum or heater hose systems, depending on the product design.

Before ordering, confirm the inside diameter, outside diameter where relevant, hose length, bend angle, wall thickness and connection type. The hose material must also be suitable for the temperature, pressure and medium involved.

 

Not every silicone hose is suitable for every engine application. Product specifications should be checked against the actual operating conditions. 

How to Identify the Right Replacement Part

 

If you are replacing an existing component, start with the following information:

  • Vehicle or equipment details: Make, model, year and engine version, where applicable.
  • Original part number: An OEM or manufacturer part number can help identify the required component.
  • Dimensions and mounting details: Provide measurements, bolt patterns, sleeve dimensions or connection sizes as relevant.
  • Material and operating conditions: Confirm the required rubber material, hardness, temperature range and other application requirements.
  • Quantity: Specify the required order quantity and whether a sample is needed first.

Do not rely on appearance alone. Components that look alike may differ in dimensions, hardness, mounting geometry or intended use.

If the part number is unavailable, provide clear photographs of the original component, measured dimensions and any visible markings. A drawing or physical sample can provide additional information when the fit cannot be established from photographs alone.

Sourcing Custom Rubber Components

 

If a standard product does not match your requirements, a drawing or physical sample can help clarify the design.

When requesting a quotation for a custom component, provide the required dimensions, material and hardness, mounting details, quantity and any relevant operating conditions. For hoses, include the required shape, dimensions, connections and service conditions.

The available manufacturing process, tooling requirements and production feasibility should be confirmed for each specific part before placing an order.

Request a Quote

 

To help identify a suitable component, send us the original part number, drawing, dimensions or sample details, together with the required quantity and application information.

We can review the information provided and clarify any additional specifications needed before quotation.

Related Products

 

Explore the relevant product categories:

  • Rubber Vibration Mounts & Pads - for suitable equipment mounting and vibration isolation applications.
  • Rubber Bushings & Tube Connectors - for relevant bushing and connection requirements.
  • Silicone Hoses & Tubing - for compatible hose and tubing applications.
  • Looking for a replacement or custom component?

Share your part details or technical requirements to discuss the available options and request a quotation.

1

2

Rubber Vibration Mounts & Pads for Industrial Machinery

Industrial motors, compressors and other machinery can transmit vibration through their mounting points to the supporting structure. Rubber vibration mounts and pads are used in suitable installations to help reduce transmitted vibration and provide cushioning between equipment and its base.

 

The right product depends on the equipment load, mounting arrangement, operating conditions and required dimensions. Choosing a mount by appearance or size alone may result in an unsuitable fit or inadequate vibration isolation.

Where Are Rubber Vibration Mounts Used?

 

Motors and Pumps

Rubber vibration mounts may be installed between equipment mounting points and the supporting frame or base. The required mount depends on the equipment weight, load distribution and mounting dimensions.

When replacing existing mounts, check the mounting hole positions, overall height and load requirements before selecting a replacement.

 

Compressors and Generators

Compressors and generators can produce continuous vibration and additional loads during starting and stopping. Mounting requirements vary with equipment weight, operating speed and installation design.

A suitable mount should support the actual load at each mounting point while providing the required level of vibration isolation. Check the equipment specifications and mounting arrangement before choosing a replacement.

 

Other Industrial Equipment

Rubber mounts and pads may also be used with other machinery where the product design and operating conditions are suitable. Equipment weight, vibration characteristics, available installation space and the supporting structure should all be considered.

Rubber Vibration Mounts vs. Rubber Pads

 

Rubber mounts and rubber pads serve related purposes, but they are not interchangeable in every application.

Rubber Vibration Mounts

Mounts are installed at designated mounting points to support equipment and help isolate vibration from the supporting structure. Their dimensions, stiffness and load capacity must match the installation requirements.

Rubber Vibration Pads

Pads are placed between suitable equipment bases and supporting surfaces. They can provide cushioning and help reduce vibration transmission where the installation is designed for this type of support.

The correct choice depends on the equipment load, mounting arrangement and required isolation performance. A pad should not be used as a direct substitute for a load-rated mount without checking its suitability.

How to Select the Right Vibration Mount

 

Before ordering, check the following details:

  • Equipment weight and load: Confirm the total operating weight and, where possible, the load carried by each mounting point.
  • Mounting dimensions: Provide the overall dimensions, mounting hole spacing, bolt or thread specifications and available installation height.
  • Operating conditions: Identify the equipment type, operating speed and whether it produces continuous vibration, intermittent movement or significant starting loads.
  • Environment: Confirm the operating temperature and any exposure to oil, chemicals, moisture or other conditions that may affect the rubber material.
  • Required performance: Describe the vibration problem and any specific isolation requirements, if known.

These details help narrow down the available options. The appropriate mount should be selected according to its load rating, design characteristics and the actual equipment requirements.

Rubber mounts can help limit vibration transmitted through the mounting structure, but they do not automatically correct problems caused by unbalanced rotating parts, misalignment or other mechanical faults.

Replacing Existing Mounts or Pads

 

If you are sourcing a replacement, provide the original part number, drawing or sample where available. Clear photographs and measured dimensions can also help identify the existing mounting arrangement.

If the original specification is unavailable, start with the equipment model, operating weight, mounting dimensions and required quantity. Additional information may be needed to confirm load suitability and mounting compatibility.

Request a Quote

 

To help identify a suitable product, send us the following information where available:

  • Equipment type and model
  • Total operating weight and load per mounting point
  • Mounting dimensions or technical drawing
  • Required rubber material or hardness, if specified
  • Operating environment and vibration requirements
  • Required quantity

We can review the information provided and clarify any additional details needed before quotation.

Related Products

 

Explore the relevant product categories:

  • Rubber Vibration Mounts --- for suitable equipment mounting and vibration isolation applications.
  • Rubber Vibration Pads --- for compatible installations requiring a cushioning layer between equipment and its supporting surface.
  • Rubber Bushings --- for suitable mechanical connections and applications requiring cushioning between components.
  • Looking for a suitable vibration mount or pad?

Share your equipment details, dimensions or existing part information to discuss your requirements and request a quotation.

1

2