Technical Specifications
|
Item |
Factory Specification |
|
Product Name |
Standard O Rings |
|
Category |
O Ring |
|
Supply Type |
Factory direct, wholesale, OEM production |
|
Material Options |
NBR, EPDM, FKM, silicone, HNBR, CR, SBR, NR, PU |
|
Hardness Range |
30–90 Shore A |
|
Common Hardness |
50, 60, 70, 80 Shore A |
|
Size Route |
Metric size, inch size, JIS B2401, ISO 3601, AS568 reference, or custom drawing |
|
Application Type |
Static seal, radial seal, face seal, light dynamic seal after review |
|
Production Method |
Compression molding, transfer molding, injection molding |
|
MOQ |
Usually from 1,000 pcs per size; mixed-size orders quoted by list |
|
Packing |
PE bag, box, compartment kit, export carton, OEM label |


Product Overview
Standard O Rings are normally purchased for replacement stock, repair kits, pump fittings, valve covers, meter housings, pneumatic parts, and OEM assembly lines. For this product, the main work is not redesigning the seal. The important work is keeping the size, hardness, compound, and packing format stable from one batch to the next.
VANSER supplies standard rubber O rings from existing molds where possible. If the size is not covered by the current mold list, buyers can send ID × CS, OD × CS, groove data, or a sample. For distributor orders, we can separate parts by size, material, hardness, buyer code, or kit position.


Material Selection by Order Condition
For oil-side replacement jobs, NBR is usually quoted first because it covers many mineral oil, grease, hydraulic oil, and common machine oil conditions. EPDM is reviewed for water, ozone, HVAC, and outdoor exposure, but it should not be used for petroleum oil. FKM is checked when old NBR seals become hard, crack, or lose rebound in hot oil or fuel-related service.
Material should not be copied from an old order if the working fluid has changed. A size that worked in oil service may need a different compound when the same groove moves to hot water, coolant, outdoor exposure, or clean assembly use.

Packing Control for Mixed Orders
Wholesale buyers often order many close sizes in one shipment. If the labels are not clear, the warehouse may mix sizes before the parts reach production or service teams. VANSER can pack by size, material, hardness, buyer part number, repair kit position, or compartment layout.
For repeat orders, we can keep the same mold record, compound record, label format, and packing method. This helps the buyer reorder without rebuilding the whole size list every time.


RFQ Details
Send the size list, material, hardness, quantity per size, packing layout, and working medium. If the order is for repair kits, include the kit position or buyer part number. VANSER will check mold status, MOQ, compound availability, and production lead time before quotation.
Hot Tags: high-performance o rings, China high-performance o rings manufacturers, suppliers, factory