Pu Elbow

Send Inquiry
Pu Elbow
Details
This pu elbow is used where a pneumatic tube needs to turn near a valve port, cylinder, manifold, or panel wall without forcing the tube into a sharp bend.
The elbow body gives the tube a fixed 90 degree route in compact spaces.
The push-in side holds the matched tube OD and insertion depth.
Threaded or swivel versions help set the outlet direction after installation.
Small fittings can be packed by tube size, thread type, body form, and buyer code.
Category
Pu Pipe Fittings
Share to
Description

Technical Specifications

 

 

Fitting area

Product detail

Product type

90 degree PU pneumatic elbow fitting for compressed-air tube routing.

Tube connection

Tube OD, insertion depth, release collar position, and sealing contact.

Port connection

Thread size, fixed or swivel direction, seal ring, and installation clearance.

Working area

Valve port, cylinder port, manifold, control panel, machine frame, and compact air circuit.

 

Angled fitting for tight routes

 

 

A PU elbow is used when the tube cannot leave the port in a straight line. In a compact machine, the fitting may sit close to a panel wall, another connector, or a valve block. The elbow shape lets the tube turn immediately after the port while keeping the tube end seated in the fitting.

 

The push-in side needs a clean tube end and a smooth outside surface. If the tube is cut at an angle or pushed in under side load, the seal area can be affected. The elbow body should leave enough room for the release collar, especially when the fitting is installed inside a control cabinet or between several pneumatic parts.

connector for pneumatic air lines

Fixed and swivel forms

 

 

A fixed elbow works when the outlet direction is known before installation. A swivel type is used when the final tube direction must be adjusted after the threaded end is tightened. These two forms look similar in a small bag, but they behave differently during assembly.

 

For threaded versions, the port thread, sealing face, and available wrench space should match the equipment layout. This pneumatic elbow fitting is for compressed-air tube routing. It is not quoted as a hydraulic fitting, fuel fitting, steam fitting, or chemical-service connector.

elbow fitting for air tubing

 

Packing and Quote Notes

 

 

Mixed fitting orders can include straight connectors, reducers, tees, and elbow fittings. Size-separated bags help keep tube OD, thread type, and body shape clear at the assembly bench.

 

Useful order data includes tube OD, thread size, elbow form, fixed or swivel requirement, port direction, working pressure, medium, quantity, and packing method.

 

Hot Tags: pu elbow, China pu elbow manufacturers, suppliers, factory

Send Inquiry