Technical Specifications
|
Production check |
Shop note |
|
Tube entry |
Made for the matched PU tube outside diameter and normal insertion depth. |
|
Port thread |
Thread size, sealing method, and tightening direction follow the valve or manifold. |
|
Body style |
Straight connector, elbow, tee, reducer, bulkhead, or threaded pneumatic connector. |
|
Air circuit use |
For compressed-air panels and machine air lines; not for fuel, steam, solvent, hydraulic pressure, or chemical service. |


Made for compact pneumatic panels
Inside a finished panel, space is usually tighter than it looks on a workbench. A tube may need to leave a valve block, pass a wire duct, turn behind another fitting, and still leave enough room for the release collar to be pressed during maintenance.
That is where a PU pneumatic fitting becomes more than a small plastic or metal part. A straight connector keeps the tube path simple when space is open. An elbow lets the tube turn close to the port without folding. A reducer fitting connects two tube sizes without adding another loose adapter in the same line.
For a pu tube fitting, the tube entry and the threaded port have to work together. A good tube cut will not solve a wrong thread. A correct thread will not help if the body points the tube into a wall, bracket, or another connector.


How it behaves during assembly
The tube should enter the fitting smoothly and reach the stop position without a rough edge scraping the internal seal. After the fitting is tightened, the body should still leave a natural path for the air tube. If the installer has to twist the tube immediately after insertion, the joint may pass the first check but leak later after vibration or panel movement.
Small pneumatic fittings are often ordered in mixed bags. Straight connectors, elbows, reducers, and threaded fittings can look similar when the bench is busy. Clear bag marks by tube size, thread, shape, and buyer part number help the assembler pick the correct part without stopping the line.


Quote Notes
Useful order data includes tube outside diameter, thread size, body type, elbow direction, reducer size, sealing method, working pressure, air condition, quantity, and packing method. For repeat pu tube fitting orders, a photo of the old fitting and installed position helps when panel space is tight.
Hot Tags: pu tube fitting, China pu tube fitting manufacturers, suppliers, factory