Key parameters of rubber seismic isolation

Aug 15, 2026

Leave a message

Key parameters for rubber seismic isolation products typically include dimensions, rubber hardness, vertical load-bearing capacity, horizontal and vertical stiffness, damping ratio, compression and shear deformation, and the isolation period. Dimensions and load-bearing capacity are determined based on the actual weight of the building or equipment, while rubber hardness directly influences the stiffness and deformation capacity of the isolation bearing. For building isolation bearings, particular attention must be paid to metrics such as vertical load-bearing capacity, horizontal displacement capacity, and equivalent stiffness to ensure stable performance under both normal operating conditions and seismic events.

 

Stiffness and damping are critical parameters for evaluating the performance of rubber isolation systems. Vertical stiffness reflects the bearing's deformation characteristics under vertical loads, whereas horizontal stiffness determines displacement behavior when the structure is subjected to horizontal forces. Isolation bearings generally require low horizontal stiffness to create a flexible connection between the superstructure and the ground; this lengthens the structure's vibration period and reduces the transmission of seismic forces to the superstructure. The damping ratio indicates the device's ability to dissipate vibrational energy; an optimal damping ratio helps control the structural displacement response during earthquakes or vibrations.

 

During the design and selection process, other parameters-such as maximum allowable horizontal displacement, ultimate load-bearing capacity, compression and shear performance, durability, and environmental adaptability-must also be considered. Over long-term use, the material properties of rubber isolation products may be affected by factors such as temperature, ozone, ultraviolet radiation, humidity, and fatigue loading; consequently, verification of aging resistance and durability is essential. For bearings used in engineering projects, calculations should be performed based on specific structural requirements and operating conditions. Furthermore, tests covering vertical load-bearing, horizontal shear, ultimate deformation, and durability must be conducted in accordance with relevant standards to ensure the product maintains stable isolation performance throughout its design service life.

Send Inquiry