During daily use, the appearance and connection points of the silicone hose should be inspected regularly, with a focus on identifying cracks, bulges, deformation, aging, scratches, or leaks (liquid or gas). Hoses subjected to prolonged high temperatures, vibration, or frequent bending require more frequent inspections. Avoid exposing the hose to friction or compression from sharp objects, and do not subject it to excessive stretching or sharp bends for extended periods, as this can damage the hose wall. If the hose surface shows signs of significant hardening, stickiness, cracking, or a loss of elasticity, it must be replaced immediately; do not continue using a compromised hose.
When cleaning, select a method appropriate for the conveyed medium. Generally, clean water or a mild detergent may be used; after cleaning, ensure all residues are fully drained and the hose interior is kept dry. For applications requiring high hygiene standards-such as food processing or laboratory use-follow specific cleaning and disinfection protocols. Avoid using sharp tools to scrape the hose wall during cleaning, and prevent contact with substances incompatible with silicone, such as highly corrosive chemicals, certain oils, and organic solvents, to avoid swelling, hardening, or performance degradation.
When a silicone hose is taken out of service for a long period or requires replacement, it should be stored properly. Store the hose in a cool, dry, well-ventilated area away from direct sunlight, heat sources, ozone sources, and corrosive substances; avoid placing heavy loads on the hose or folding it into a tight bend radius. Before reusing, inspect the hose's dimensions, elasticity, surface condition, and connections to ensure there is no aging or damage. For pressurized lines, regularly check fittings and clamps for looseness, and perform airtightness or pressure resistance tests as necessary. Proper routine inspection, cleaning, and storage help minimize abnormal damage, extend the hose's service life, and reduce the risk of leaks during equipment operation.