Rubber isolation devices typically consist of alternating layers of rubber sheets and steel plates, achieving isolation through the elastic deformation of the rubber material. The steel plates primarily bear and transfer vertical loads while constraining the lateral deformation of the rubber under compression; the rubber layers provide horizontal flexibility, allowing the structure to undergo horizontal displacement during earthquakes or equipment vibration, thereby reducing the transmission of vibration energy to the superstructure. Some isolation products incorporate internal components such as lead cores, damping materials, or other functional elements to enhance energy dissipation capabilities and improve overall isolation performance.
Rubber isolation devices are characterized by high vertical load-bearing capacity, low horizontal stiffness, and a compact overall structure. Under normal operating conditions, the isolation bearing stably supports the weight of the building or equipment while maintaining horizontal flexibility. During earthquakes or significant horizontal vibrations, the rubber layers undergo shear deformation to produce substantial horizontal displacement, creating relative movement between the superstructure and the foundation, which mitigates the impact of seismic forces and vibrations on the main structure. By adjusting parameters such as rubber layer thickness, the number of steel plates, and rubber material properties, the bearing's vertical stiffness, horizontal stiffness, and deformation capacity can be tailored to meet specific engineering requirements.
Rubber isolation systems offer advantages such as ease of installation, structural integrity, and relatively simple maintenance; however, their performance is influenced by material properties and the operating environment. Prolonged exposure to high or low temperatures, ozone, ultraviolet radiation, or moisture can lead to rubber aging, hardening, or performance degradation; therefore, environmental adaptability and durability must be fully considered during product design. For isolation bearings used in buildings, bridges, and large-scale equipment, specifications are determined based on actual loads and seismic demands, followed by testing of vertical load-bearing capacity, horizontal deformation, ultimate displacement, and durability. Through rational structural design and material selection, it is possible to ensure load-bearing safety while achieving effective seismic isolation and vibration reduction.