High Temp Vacuum Hose

Send Inquiry
High Temp Vacuum Hose
Details
This silicone vacuum line is made for heated-air and non-oil vacuum routes where port fit, wall support, bend shape, and clamp position affect the assembly.
The bore is extruded for clean seating on vacuum ports.
Wall thickness helps short bends keep a rounder shape under heat and vacuum.
Cut pieces, formed bends, or reinforced hose can follow sample or drawing.
Small hoses can be packed by ID, length, color, and buyer part number.
Category
High Temp Silicone Hose
Share to
Description

Technical Specifications

 

 

Hose point

Factory record

Silicone tube

VMQ silicone for heated-air and clean vacuum service.

Build form

Straight extrusion, cut length, formed bend, or reinforced silicone hose.

Size data

ID, OD, wall thickness, length, bend position, and clamp area.

Boundary

Air or vacuum lines only; not for oil, fuel, vapor, or hydraulic pressure.

 

Where trouble appears after fitting

 

 

A silicone vacuum line can look correct on the bench, then change after heat and vacuum pull start working. Near a bracket, the bend may flatten. At the port, a clamp can leave a deep groove. On a hanging route, the hose may soften after warm-up and touch a nearby metal edge.

 

For a high temp vacuum hose, the main job is keeping the bore open after installation. A short connector can stay as a cut piece. A longer heated route may need a thicker wall, a formed bend, or reinforcement so the hose does not collapse at the turn.

 

The old hose is more useful than color. A shiny bore can point to oil mist. A sticky end can mean the line was not carrying clean air. A flattened bend shows where vacuum pull and heat acted together. When VANSER repeats a part, the sample is read for bore size, wall section, clamp mark, bend memory, and end fit.

 

high temp silicone hose exhaust heater vacuum applications
high temp silicone hose extrusion cutting packing
high temp silicone hose heater exhaust vacuum

 

Hot air is not oil service

 

 

Silicone suits heated-air routing, but a hot-air vacuum line should not be sold as an oil or fuel hose. Oil mist, petroleum vapor, or aggressive vapor changes the material question, especially where air lines and fluid lines run close together.

 

For repeat high temp vacuum hose orders, the record keeps ID, OD, wall thickness, length, color, hose form, and packing position. Short pieces with close sizes are easy to mix, so packing by size or part number helps the installer pick the right hose.

 

high temp silicone hose coil elbow assortment

high temp silicone hose packaging bulk supply
high temp silicone hose cutting color sorting

 

Quote Notes

 

 

Useful data includes ID, OD, wall thickness, length, bend route, vacuum level, working temperature, medium, color, reinforcement need, sample or drawing, quantity, and packing method.

 

Hot Tags: high temp vacuum hose, China high temp vacuum hose manufacturers, suppliers, factory

Send Inquiry