Technical Specifications
|
Item |
Factory Specification |
|
Product Name |
x profile o rings |
|
Product Type |
X ring / four-lip rubber sealing ring |
|
Profile Shape |
X-shaped cross section with four sealing lips |
|
Rubber Compounds |
NBR, FKM, HNBR, EPDM, silicone, PU after medium review |
|
Quoted Hardness |
Commonly 60–90 Shore A, depending on groove, medium, and motion |
|
Size Data for RFQ |
ID, section height, groove width, groove depth, drawing, or sample |
|
Working Type |
Static groove, rotary seal, reciprocating seal after application review |
|
Motion Data |
Speed, stroke, lubrication, pressure, surface finish, extrusion gap |
|
Molding Method |
Compression molding; injection molding reviewed by volume |
|
MOQ |
Quoted by size, compound, mold record, and custom profile requirement |


The Product Value Is the Profile
A round O ring mainly relies on one compressed body. An X profile adds four sealing lips, so the groove must have enough width and depth for the section to sit without rolling.
VANSER quotes x profile o rings from ID, section height, groove data, drawing, or used sample. The order is not handled by ID alone because two X rings with similar inside diameter can have different section height and lip shape.


Replacement from Round O Ring
Many X profile orders start because a round O ring twists, rolls, or wears too quickly. An X profile can be a useful direction, but the groove still decides whether the change is practical.
The safer route is to compare the round O ring size with groove width, groove depth, movement type, and medium. This keeps the page technical without pretending that every round groove can be changed directly.

Practical Factory Control
For standard sizes, VANSER quotes from available mold records first. For custom X profiles, the approved sample, mold number, compound grade, hardness, and drawing version can be kept for repeat production.
Mixed-size orders can be packed by size, drawing number, buyer part number, or equipment position. This matters when several X rings have similar ID but different section height.


RFQ Details
Send ID, section height, groove width, groove depth, drawing or sample, working medium, pressure, temperature, motion type, speed or stroke, lubrication condition, hardness request, and quantity. VANSER will confirm profile feasibility, mold status, compound direction, sample need, and bulk order cost.
Hot Tags: x profile o rings, China x profile o rings manufacturers, suppliers, factory