Technical Specifications
|
Item |
VANSER Supply Details |
|
Repair Scope |
Pneumatic cylinder seal pack for compressed-air service |
|
Cylinder Areas |
Piston seal, rod seal, wiper, end cover seal, cushion seal, and small O-rings |
|
Size Basis |
Bore size, rod diameter, groove width, stroke reference, drawing, or removed seals |
|
Material Options |
NBR, PU, FKM, silicone, or specified compounds for dry or lubricated air |
|
Packing Format |
Position bags, tray groups, short notes, buyer labels, carton marks, and batch records |


When Air Loss Starts Changing Cylinder Motion
A leaking pneumatic cylinder may not leave a visible oil mark, but the problem still reaches the production line. The rod may move slower, the piston may fail to hold force at the end of travel, or air may escape near the end cover. If the cylinder is opened without a prepared repair pack, the mechanic may have to measure every small seal again before assembly can continue.
This product is supplied for compressed-air cylinder service. The set must follow the actual cylinder positions, not a general loose O-ring list.

Piston Side, Rod Side, and Cover Parts Kept Apart
Once old seals are removed, some pieces become flattened, dry, or stretched. A piston seal, rod seal, cushion seal, or small cover O-ring may look close in size but belong to different working areas. Mixing them during purchasing or warehouse handling can create another leak after the cylinder is closed.
VANSER can prepare the repair pack by position group. Piston-side parts, rod-end parts, end cover seals, wipers, cushion pieces, and small rings can be packed separately according to the buyer's drawing, removed sample order, or repair list. This helps the mechanic install the set without sorting a plain mixed bag on the bench.


Built Around Compressed-Air Service
Pneumatic cylinders depend on smooth sliding, correct lip direction, and suitable drag. A seal that fits too tightly may slow the stroke. A seal that fits too loosely may leak before the cylinder reaches its working position. Material, hardness, groove fit, dry or lubricated air condition, pressure, and temperature should be matched before production.
For repeat orders, the same position grouping, label wording, buyer code, and carton mark can be maintained, so the service team receives a repair pack that matches the cylinder layout they already use.

Quote Notes
For quotation, send the cylinder type, bore size, rod diameter, stroke if available, old seal samples or photos, cylinder brand or model, required seal positions, material, hardness, dry or lubricated air condition, working pressure, temperature range, quantity, buyer code, and packing preference.
Hot Tags: air cylinder seal kit, China air cylinder seal kit manufacturers, suppliers, factory