Technical Specifications
|
Item |
Factory Specification |
|
Product Name |
ed seal for fittings |
|
Category |
ED seal / hydraulic fitting face seal |
|
Rubber Compound |
NBR, FKM, HNBR, EPDM, silicone, confirmed by working fluid |
|
Regular Compound |
NBR for mineral hydraulic oil fittings |
|
Hardness Range |
70–90 Shore A |
|
Common Hardness |
85 Shore A or 90 Shore A when the fitting seat needs firmer support |
|
Size Reference |
DIN 3869 style size, metric fitting size, customer drawing, or sample |
|
Key Size Data |
ID, section height, fitting seat diameter, groove form |
|
Seal Position |
Static face seal on hydraulic fitting |
|
Molding Route |
Compression molding for most sizes; injection molding reviewed by order volume |
|
MOQ |
Usually from 1,000 pcs per standard size; mixed fitting orders quoted by size list |
How the Seal Builds Compression on the Fitting Face
Ed seal for fittings works after the metal fitting is tightened. The thread provides clamping force, but the rubber section has to create the sealing load on the flat face. When the section height is wrong, the fitting may look fully assembled while oil still appears during pressure testing.
For this reason, VANSER does not quote this part from outside diameter alone. We need ID, section height, seat shape, thread standard, working oil, and pressure. If only an old ring is available, we can measure it first, but fitting data is still required before material approval.


Section Height, Part Code, and Repeat Supply
Fitting suppliers often deal with close sizes that look similar in storage. A small section difference can decide whether the seal sits correctly in the fitting seat. For OEM and distributor orders, VANSER can link each seal size to the buyer's fitting code, drawing number, or maintenance list.
This helps reduce repeat-order confusion. The same mold number, rubber compound, hardness, label format, and packing method can be kept when the buyer reorders the same fitting model.


Material Boundary at the Fitting Side
For mineral hydraulic oil fittings, NBR is normally quoted first. If the fitting works near heat or old NBR rings become hard after service, VANSER reviews FKM or HNBR after checking temperature and pressure.
EPDM is not quoted for petroleum oil fittings. It only enters the discussion when the working fluid changes to water, steam-reviewed service, or glycol-based media. Changing compound without checking the fluid can create a wrong purchase even when the size is correct.

Order Details
Send the fitting drawing, thread standard, ID × section height, oil type, pressure, quantity, and packing request. VANSER will check hardness, ID, section height, sealing face marks, flash, mold availability, MOQ, and sample need before bulk production.
Hot Tags: ed seal for fittings, China ed seal for fittings manufacturers, suppliers, factory