Air Conditioning Anti Vibration Mounts

Send Inquiry
Air Conditioning Anti Vibration Mounts
Details
These HVAC rubber mounts support condenser feet, rooftop frames, floor AC units, and fan coil bases where vibration transfer and installed height both affect assembly.
The molded rubber seat gives the AC base a flat contact face.
Stud, washer, insert, or bonded plate can be matched from drawing or old sample.
Rubber grade and metal finish are selected for outdoor exposure and load.
Batch packing can follow size, hardware type, and buyer part number.
Category
Anti Vibration Mounts
Share to
Description

Technical Specifications

 

 

Mount part

Production reference

Rubber body

EPDM, CR, NR, or NBR selected by weather, oil contact, aging risk, and load.

Metal hardware

Zinc-plated steel, stainless steel, stud, washer, insert, or bonded plate.

Structure

Stud mount, rubber foot, washer mount, cylindrical mount, or custom base support.

Size data

Rubber diameter, height, stud size, thread length, washer size, and base contact face.

Hardness

Commonly 45–75 Shore A, quoted with unit weight and support point quantity.

 

HVAC rubber mount size range

rubber metal mount construction

 

Built for AC base support

 

 

Air conditioning anti vibration mounts are not only small rubber feet under a machine. They keep the condenser or fan coil base away from hard frame contact, while the rubber body absorbs part of the vibration from the running unit. A flat seat, centered stud, and clean washer contact help the base sit evenly after tightening.

 

For VANSER supply, the advantage is in the rubber-metal match. The stud must pass through the base hole without pulling the rubber sideways. The washer face should sit flat on the foot or frame bracket. If a bonded plate or insert is used, the contact area is checked from the drawing or old part before production.

 

air conditioner base isolation support

custom HVAC mount sizing data

 

Material and height should match the site

 

 

Outdoor AC mounts face rainwater, dust, heat, and long compression. EPDM is often used when weather aging is the main concern. CR or NBR may be reviewed when oil mist, machinery contact, or equipment-room exposure is involved.

 

Old samples are useful, but a collapsed sample height should not be copied directly. The working height under the unit affects pipe clearance, drain outlet position, and frame level. For repeat air conditioning anti vibration mounts, the approved rubber grade, hardness, hardware size, and packing mark can stay with the order record.

 

outdoor HVAC vibration mount materials

HVAC condenser vibration isolation mounts

Quote Notes

 

 

Useful order data includes drawing or old sample photos, rubber diameter, rubber height, stud size, thread length, washer size, unit weight, support point quantity, installed height, rooftop frame condition, and working environment.

 

Hot Tags: air conditioning anti vibration mounts, China air conditioning anti vibration mounts manufacturers, suppliers, factory

Send Inquiry