The design of a sealing ring begins with establishing basic parameters based on actual operating conditions, such as working pressure, temperature, the medium being sealed, movement speed, installation method, and service life. Appropriate sealing structures and materials are selected based on these conditions; for instance, static seals typically employ O-rings, whereas reciprocating or rotary applications require lip-type seals chosen according to specific friction, wear, and leakage requirements. Material selection focuses on properties such as resistance to oil, high and low temperatures, corrosion, and wear, as well as elasticity, ensuring the seal does not suffer from severe aging, hardening, softening, or cracking due to the medium or environmental factors during long-term use.
Regarding structural design, parameters such as the seal's cross-sectional dimensions, groove dimensions, compression ratio, and mating clearances must be determined rationally. Insufficient compression may result in inadequate sealing pressure and leakage, while excessive compression increases assembly resistance and friction, potentially accelerating permanent deformation and wear. Therefore, the design must establish an appropriate compression range based on the material and operating conditions while controlling groove width, depth, and surface roughness. For dynamic seals, factors such as direction of movement, speed, and frictional heat generation must be considered; dimensional tolerances and mating clearances between the shaft and bore must be carefully controlled to prevent the seal from being extruded into the gap and damaged.
Product design must also fully account for manufacturing, assembly, and maintenance requirements. The seal structure should be kept simple, avoiding unnecessary sharp corners, thin walls, or stress concentration points to reduce manufacturing complexity and the risk of damage during use. Mating surfaces contacting the seal require appropriate machining precision and must be free of defects such as burrs, scratches, or rust; installation points should incorporate necessary lead-in features or chamfers to prevent scratching the seal during assembly. Once the design is finalized, the product must undergo dimensional checks, material property testing, pressure resistance tests, airtightness tests, and necessary durability tests to verify sealing performance and service life. Finally, comprehensive documentation-including product drawings, material specifications, technical parameters, inspection standards, and installation/usage guidelines-is produced to serve as the basis for mass production and subsequent maintenance.