During operation, sealing kits should be inspected regularly based on equipment performance, focusing on the sealing areas for signs of oil, air, or water leakage, abnormal noise, or temperature irregularities. Additionally, seals, gaskets, and retaining rings should be checked for aging, wear, deformation, cracking, or hardening. Inspection frequency should be increased for high-usage equipment, such as hydraulic or pneumatic systems. If minor leakage is detected, the root cause must be identified; simply overtightening bolts or increasing clamping force is not an appropriate solution, as this can lead to seal extrusion, deformation, or damage to equipment components.
When performing maintenance or replacing sealing kits, first clean the seal grooves and mating surfaces to remove oil, dust, metal filings, and old sealing material. Inspect contact surfaces-such as shafts, bores, and flanges-for scratches, burrs, corrosion, or deformation. During replacement, verify that the new sealing kit's specifications, material, hardness, and structure match the equipment requirements; do not substitute with products of merely similar dimensions. Ensure seals lie flat during installation to avoid twisting, stretching, folding, or scratching; suitable lubricants may be used to facilitate installation if necessary. Reusing seals that have been removed and show significant deformation or permanent compression set is generally not recommended.
Spare sealing kits require proper classification, labeling, and storage management. Store them in a cool, dry, and well-ventilated area away from direct sunlight, heat sources, ozone sources, oils, and corrosive substances. Seals of different materials and specifications should be stored separately and protected from heavy loads or prolonged stretching to prevent deformation and aging. Inventory should be inspected regularly, and any products showing cracks, tackiness, hardening, discoloration, or significant deformation should be discarded. Diligent routine inspections, correct installation, regular replacement, and proper storage help minimize abnormal seal damage and leakage, extend equipment service life, and reduce future maintenance costs.