Spiral Metallic Gasket

Send Inquiry
Spiral Metallic Gasket
Details
A semi-metallic flange gasket with a firm wound body, secured terminal turns, and filler held evenly between the metal layers.
Tight outer turns stay closed when the ring is lifted.
Filler does not rise above the metal strip.
The closing area stays level with the sealing face.
Roundness is protected during packing.
Category
Spiral Wound Gaskets
Share to
Description

Technical Specifications

 

 

Item

Detail

Reference

ASME B16.20 pattern when specified

Construction

Formed metal strip with graphite, PTFE, or agreed filler

Forms

Winding only, outer-ring type, or inner-and-outer-ring type

Finished Condition

Firm winding, level face, secure terminal turns, and no exposed filler

 

gasket for oil refinery piping

metal seal for process equipment

 

The winding leaves our bench as one complete ring

 

 

The outer turn on our spiral metallic gasket is secured before packing. When the gasket is lifted from one side, the winding stays closed instead of opening into a loose coil. The body also keeps its circular shape rather than sagging into an oval.

 

We keep the filler inside the formed metal turns. It does not stand above the face as a dark ridge, and the closing area is finished without a hard lump. Laid on a flat bench, the sealing body sits down evenly instead of rocking on one raised section.

 

These are not only inspection points. They are the advantages the installer receives. There is no loose turn to push back, no exposed filler to trim away, and no distorted arc to reshape before the gasket is placed on the flange.

 

metallic seal for boiler joints

seal for high pressure valves

 

The same finish continues around the circumference

 

 

A firm ring should not feel sound in one quarter and soft in the next. On our winding, the strip tension and filler position remain steady around the full circle. The terminal turns stay where they were finished, while the sealing face keeps the same general level across the ring.

 

The finished spiral metallic gasket is also protected after winding. Heavier parts are kept away from the sealing body, and the ring is packed so one side is not crushed flat. The gasket reaches the buyer with the same round form and closed outer turn seen at final inspection.

 

The selling point is easy to verify without opening a specification file. Pick up the ring: it stays together. Place it flat: it does not rock. Look at the edge: the filler remains between the metal layers. Our gasket arrives as a stable wound component, ready for assembly rather than correction.

 

seal for pressure vessel flanges

wound gasket for valve connections

 

Quote Notes

 

 

Send the flange standard and class, nominal size, winding metal, filler, ring configuration, quantity, and buyer part number.

 

Hot Tags: spiral metallic gasket, China spiral metallic gasket manufacturers, suppliers, factory

Send Inquiry