Pump Flange Gasket

Send Inquiry
Pump Flange Gasket
Details
A finished nonmetallic gasket for pump inlet and outlet flanges, with the port opening and bolt pattern completed as one profile.
Clear bore leaves the pump opening unobstructed.
Bolt holes do not pull the gasket off centre.
Full sealing band remains around the nozzle face.
Flat packing keeps the profile ready for fitting.
Category
Flange Gaskets
Share to
Description

Technical Specifications

 

 

Item

Detail

Application

Pump suction or discharge flange

Main Form

Ring or full-face nonmetallic gasket

Finished Features

Port opening, bolt holes, and outside profile

Production

Die-cut or molded

Materials

Compressed fibre, rubber, graphite sheet, or specified material

 

gasket for pump assemblies

 

seal for pump housings

 

Nothing should project into the pump opening

 

 

A nearby pipe gasket can accept the bolts and still be wrong at the bore. If the centre opening is too small or shifted, part of the material sits inside the pump port. The joint may close, but the gasket edge remains in the flow opening and the sealing band becomes thin on the opposite side.

 

The pump flange gasket is finished around the pump-side port. Its bore stays clear of the suction or discharge opening, while the remaining ring keeps a continuous contact width around the nozzle face. Bolt holes come from the same layout, so fitting the studs does not drag the gasket away from the port.

 

The part can be placed once and left there. The installer does not need to rotate it, trim the bore, or pull one hole into position while watching the opposite edge move across the opening.

 

flange washer for fluid pumps

 

The pipe can return without shifting the seal

 

 

Pump connections often have little movement once the pipework is brought back. A gasket with loose or stretched holes can move as the mating flange is guided into place. One edge is caught early while the rest of the ring is still open.

 

Each pump flange gasket arrives flat, with clean openings and enough material around the complete port. The profile stays visible during alignment, and the connected flange can close without pushing the gasket inward.

 

Across a maintenance batch, the bore, hole spacing, and outside shape return in the same relationship. The workshop receives a part that keeps the pump opening clear, stays centred while the pipe is reconnected, and leaves the full sealing band under compression.

 

leakproof seal for pump lines

sealing ring for pump ports

 

Quote Notes

 

 

Send the pump or flange reference, flange class, face type, material, thickness, quantity, and buyer part number.

 

Hot Tags: pump flange gasket, China pump flange gasket manufacturers, suppliers, factory

Send Inquiry