Leaf Spring Rubber Bushing

Send Inquiry
Leaf Spring Rubber Bushing
Details
This leaf spring rubber bushing is pressed into a spring eye or shackle end to hold the bolt sleeve in line while the suspension works under road shock.
The outer rubber body fits tightly in the spring eye bore.
The center sleeve supports the bolt instead of letting it run against rubber.
Chamfered, flanged, grooved, or plain ends can follow the removed part.
Front eye, rear eye, and shackle pieces can be packed separately for repair kits.
Category
Rubber Bushings
Share to
Description

Technical Specifications

 

 

Checked area

Practical range

Press-in fit

OD, ID, length, rubber wall, sleeve bore, and spring eye bore are matched from sample or drawing.

Sleeve position

Sleeve length, bolt size, end face, and side position are kept straight for bracket clamping.

Body shape

Plain sleeve, flanged body, chamfered mouth, grooved outside, or bonded sleeve design.

Road exposure

Used around suspension shock, grease, water splash, dust, and outdoor temperature; not for fuel or hydraulic lines.

 

Leaf Spring Bushing Sleeve Detail

Leaf Spring Bushing Structure Detail

 

Spring eye construction

 

 

The bushing works as a pressed suspension insert, not a loose rubber sleeve. Once it is inside the spring eye, the rubber body holds the outside fit and the sleeve keeps the bolt line stable through the center. When the axle moves, the rubber wall takes shock and small pivot movement between the spring and the bracket.

 

A leaf spring rubber bushing often looks simple before installation. The real difference is in the sleeve length, wall thickness, and edge form. If the sleeve is too short, the bracket may clamp rubber instead of metal. If the wall is too thin, the spring eye can become noisy after load. If the mouth has no chamfer where the old part needed one, the rubber edge may shave during pressing.

 

Rubber Metal Bushing Bonded Structure

Leaf Spring Bushing Suspension Use

 

Body forms used in repair kits

 

 

Plain bushings are common where the spring eye controls the outside position. Flanged bushings help stop the part at the end face. Grooved or chamfered bodies are used when the old spring eye, shackle, or bracket shape leaves little room for adjustment. Sleeved designs keep the bolt away from direct rubber contact.

 

For suspension repair kits, similar parts should not be thrown into one unmarked bag. Front eye, rear eye, and shackle-side bushings may be close in size but different in sleeve length or edge detail. VANSER can pack them by spring position, buyer part number, or kit group when the order requires it.

 

Leaf Spring Bushing Warehouse Stock

Leaf Spring Bushing Packing Service

 

Quote Notes

 

 

Useful order data includes spring eye bore, bushing OD, ID, length, sleeve bore, sleeve length, bolt size, wall thickness, hardness, spring position, road exposure, quantity, and packing method.

 

Hot Tags: leaf spring rubber bushing, China leaf spring rubber bushing manufacturers, suppliers, factory

Send Inquiry