<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9" xmlns:video="http://www.google.com/schemas/sitemap-video/1.1">
<url>
<loc>https://www.vanserrubber.com/sealing-rings/x-ring-seal/x-profile-o-rings.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/x-profile-o-rings522c8.jpg</video:thumbnail_loc>
<video:title>X Profile O Rings</video:title>
<video:description>X profile O rings are four-lip rubber seals used when groove fit, rolling control, and sealing contact need more control than round O rings.
Four-Lip Molded Profile: X-shaped section gives multiple sealing lips when the groove can support the profile.
Compound Matched to Use: NBR, FKM, HNBR, EPDM, silicone, or PU can be quoted by medium and movement type.
Drawing or Sample Quote: Quote by drawing, used sample, ID, section height, groove width, or groove depth.
Repeat Order Record: Mold number, compound grade, hardness, approved sample, and packing label are kept for future batches.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090814135388cd3.mp4</video:content_loc>
<video:publication_date>2026-09-08T14:12:55+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/rubber-vibration-isolation/anti-vibration-mounts/compressor-rubber-mounts.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/compressor-rubber-mountsd4ece.jpg</video:thumbnail_loc>
<video:title>Compressor Rubber Mounts</video:title>
<video:description>Compressor rubber mounts support compressor feet and reduce vibration transfer into frames, floors, and connected pipework.
Rubber-to-Metal Mount Build: Rubber body, stud, washer, plate, or insert can be molded as one mount structure.
Compressor Room Material: NR, CR, NBR, or EPDM is quoted by load, oil mist, heat, and working location.
Drawing or Sample Quote: Quote by rubber size, bolt size, installed height, metal part, or old mount sample.
Part Number Packing: Mounts can be packed by compressor model, foot position, buyer code, or size.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/202609081532573ba57.mp4</video:content_loc>
<video:publication_date>2026-09-08T15:34:42+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/rubber-vibration-isolation/anti-vibration-pads/air-compressor-rubber-pads.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/air-compressor-rubber-padsb60c0.jpg</video:thumbnail_loc>
<video:title>Air Compressor Rubber Pads</video:title>
<video:description>These rubber compressor pads sit under compressor feet, tank supports, and small skid frames where vibration, floor contact, oil mist, and installed height affect the base.
Dense rubber gives the compressor foot a firm seat instead of a hollow contact point.
Flat cut or molded faces help the pad sit cleanly between the base and workshop floor.
Oil-resistant rubber can be reviewed when grease marks or compressor oil mist are present.
Cut, punched, grooved, ribbed, or molded pads can follow the foot shape or old sample.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260908155438140fb.mp4</video:content_loc>
<video:publication_date>2026-09-08T15:54:46+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/rubber-vibration-isolation/anti-vibration-pads/neoprene-vibration-pads.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/neoprene-vibration-pads7549e.jpg</video:thumbnail_loc>
<video:title>Neoprene Vibration Pads</video:title>
<video:description>These neoprene vibration pads support machine feet, frame bases, and workshop equipment where CR rubber, pad thickness, and surface pattern affect seating under load.
Compact CR rubber gives the equipment foot a firm layer between the base and floor.
Ribbed, grooved, flat, punched, or molded faces can match different contact shapes.
Moderate oil mist and aging resistance are the main reasons buyers choose CR material.
Sheet-cut or molded pads can follow a drawing, used sample, or repeated part number.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/202609081556456f786.mp4</video:content_loc>
<video:publication_date>2026-09-08T15:57:37+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/rubber-vibration-isolation/anti-vibration-pads/anti-vibration-matt-for-washing-machine.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/anti-vibration-matt-for-washing-machine53578.jpg</video:thumbnail_loc>
<video:title>Anti Vibration Matt for Washing Machine</video:title>
<video:description>This molded washer pad is used under laundry appliance feet where spin movement, floor surface, cup depth, and rear hose clearance all affect how the machine sits.
The top cup helps the washer foot stay centered during spin.
The bottom face is made to contact tile, concrete, wood, or PVC flooring.
Pad height should support the machine without lifting one corner too high.
Four pieces can be packed as one set with matched color, height, and material.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/202609081600088bc48.mp4</video:content_loc>
<video:publication_date>2026-09-08T16:00:15+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/silicone-tubing/high-temp-silicone-hose/high-temp-silicone-exhaust-hose.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/high-temp-silicone-exhaust-hose662e9.jpg</video:thumbnail_loc>
<video:title>High Temp Silicone Exhaust Hose</video:title>
<video:description>This high temp silicone exhaust hose is used around heater boxes, heat shields, and hot-air outlets where the hose end sits close to clamps, beads, brackets, and warm metal.
The clamp area stays straight enough for the band to press on a round section.
The silicone wall supports elbows and reducers through heat cycles.
Trimmed mouths help the hose pass over pipe beads without folding at the lip.
Used hoses are read for hard ends, bead rings, clamp cuts, and narrowed bends.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090816274707620.mp4</video:content_loc>
<video:publication_date>2026-09-08T16:27:59+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/silicone-tubing/high-temp-silicone-hose/high-temp-silicone-hose-for-exhaust.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/high-temp-silicone-hose-for-exhaustd1255.jpg</video:thumbnail_loc>
<video:title>High Temp Silicone Hose for Exhaust</video:title>
<video:description>This high temp silicone hose for exhaust is used on hot-air routes close to exhaust-related heat, where the hose must hold shape near clamps, brackets, and warm metal.
The hose body supports bends and short formed routes after heating.
Clean cut ends help the clamp sit on a round section of the pipe.
Old hose marks can show hard ends, rubbed sides, or heat-aged areas.
Straight sections, elbows, reducers, and formed shapes can follow a sample or drawing.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/202609081635277d990.mp4</video:content_loc>
<video:publication_date>2026-09-08T16:35:37+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/silicone-tubing/silicone-intake-hose/3-inch-silicone-intake-hose.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/3-inch-silicone-intake-hose522a7.jpg</video:thumbnail_loc>
<video:title>3 Inch Silicone Intake Hose</video:title>
<video:description>This intake connector is used between the air pipe and intake tube where the hose has to stay round, sit cleanly under the clamp, and keep the air path open.
The bore keeps a rounder air path under clamp pressure.
The cut end is trimmed so the lip does not tear during fitting.
The silicone wall gives the clamp land enough body.
Coil stock and short pieces can be separated by length, color, and buyer code.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090816405942ac1.mp4</video:content_loc>
<video:publication_date>2026-09-08T16:41:28+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/silicone-tubing/silicone-intake-hose/silicone-intake-elbow.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/silicone-intake-elbowa115e.jpg</video:thumbnail_loc>
<video:title>Silicone Intake Elbow</video:title>
<video:description>This silicone intake elbow is a formed hose connector for intake pipes that meet at an angle inside the engine bay.
The molded bend keeps the intake route in shape without twisting a straight hose.
The inner curve is supported to reduce folding after the hose is pushed onto the pipe.
Both hose mouths keep straight clamp areas before the curve begins.
Reducer versions connect two different pipe sizes while keeping the bend direction stable.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260908164331caec8.mp4</video:content_loc>
<video:publication_date>2026-09-08T16:43:55+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/polyurethane-tubing/pu-pipe-fittings/polyurethane-soaker-hose.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/polyurethane-soaker-hose12b7f.jpg</video:thumbnail_loc>
<video:title>Polyurethane Soaker Hose</video:title>
<video:description>VANSER supplies polyurethane soaker hose for low-pressure seepage watering lines, project length coils, connector-end orders, and separated packing.
Seepage Wall Check: Hose wall structure is checked with the target water release condition.
Flexible Coil Body: The hose can be coiled or cut for bed, row, or equipment-side routing.
Connector End Review: Connector type and water pressure are checked before sample preparation.
Length-Separated Packing: Coils can be packed by length, diameter, and buyer part number.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260908170133ad84a.mp4</video:content_loc>
<video:publication_date>2026-09-08T17:01:48+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/polyurethane-tubing/polyurethane-hose/3-8-polyurethane-air-hose.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/3-8-polyurethane-air-hose80ba2.jpg</video:thumbnail_loc>
<video:title>3 8 Polyurethane Air Hose</video:title>
<video:description>This pu air pipe is used in pneumatic circuits where valve blocks, cylinders, manifolds, and machine air routes need a light tube with a clean outside surface for fittings.
The outside surface stays smooth for push-in connector sealing.
Wall thickness supports bending around machine panels and frame routes.
Metric and inch sizes can be supplied as coils or cut sections.
Color and length can be separated for stock, panel work, or equipment assembly.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260908170133ad84a.mp4</video:content_loc>
<video:publication_date>2026-09-08T17:07:14+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/polyurethane-tubing/polyurethane-hose/reinforced-polyurethane-hose.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/reinforced-polyurethane-hose6b7f8.jpg</video:thumbnail_loc>
<video:title>Reinforced Polyurethane Hose</video:title>
<video:description>This reinforced PU hose is used on machine-side compressed-air lines where a plain PU tube may wear too quickly at clips, frame openings, guide plates, or fixture routes.
The reinforced wall gives extra support at rubbing and contact points.
The hose keeps a lighter feel than many heavy rubber air lines.
Clean cut lengths suit pneumatic fixtures, machine frames, and air distribution points.
Color, size, length, and packing marks can follow the approved sample or route record.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260908171522d715f.mp4</video:content_loc>
<video:publication_date>2026-09-08T17:15:31+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/industrial-components/rubber-bushings/control-arm-rubber.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/control-arm-rubberefc5d.jpg</video:thumbnail_loc>
<video:title>Control Arm Rubber</video:title>
<video:description>This rubber-metal bushing part is made for suspension control arms where the arm needs pivot support and controlled movement under road load.
The rubber section supports movement without acting like a plain spacer.
Inner sleeves and outer shells are matched to the arm bore and bolt position.
Bonded faces stay clean so rubber and metal work as one part.
Arm positions can be packed separately for repair kits or distributor stock.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090910223579e2f.mp4</video:content_loc>
<video:publication_date>2026-09-09T10:22:42+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/industrial-components/rubber-bushings/leaf-spring-rubber-bushing.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/leaf-spring-rubber-bushing5edf2.jpg</video:thumbnail_loc>
<video:title>Leaf Spring Rubber Bushing</video:title>
<video:description>This leaf spring rubber bushing is pressed into a spring eye or shackle end to hold the bolt sleeve in line while the suspension works under road shock.
The outer rubber body fits tightly in the spring eye bore.
The center sleeve supports the bolt instead of letting it run against rubber.
Chamfered, flanged, grooved, or plain ends can follow the removed part.
Front eye, rear eye, and shackle pieces can be packed separately for repair kits.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090910233941385.mp4</video:content_loc>
<video:publication_date>2026-09-09T10:24:32+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/industrial-components/rubber-bushings/suspension-rubber-bushings.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/suspension-rubber-bushingsfe6f6.jpg</video:thumbnail_loc>
<video:title>Suspension Rubber Bushings</video:title>
<video:description>These chassis rubber parts are used in suspension joints where metal arms, links, brackets, and bolts need controlled movement without direct metal-to-metal contact.
The rubber body supports road vibration and joint movement.
Inner sleeves, outer shells, flanges, and offset forms can follow the old part.
Bonded rubber-metal designs keep the sleeve and rubber section working together.
Parts can be packed by suspension position, drawing number, or buyer code.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260909102518e50b7.mp4</video:content_loc>
<video:publication_date>2026-09-09T10:25:43+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/industrial-components/rubber-bushings/rubber-bushing-in-car.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/rubber-bushing-in-car02297.jpg</video:thumbnail_loc>
<video:title>Rubber Bushing in Car</video:title>
<video:description>VANSER supplies rubber bushing in car replacement parts for chassis support, suspension joints, engine brackets, sleeve fit, and custom molded orders.
Vehicle Position Defined: Bushing location is defined by chassis, suspension, bracket, arm, or engine-side position.
Old Part Fit Check: Bore, OD, sleeve, flange, and rubber body are checked from sample or drawing.
Load Direction Review: Compression, pivot movement, vibration, and road exposure are reviewed before quotation.
Part Number Packing: Bushings can be packed by vehicle position, drawing number, and buyer part number.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090910263374021.mp4</video:content_loc>
<video:publication_date>2026-09-09T10:27:11+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/industrial-components/rubber-tube-connectors/rubber-hose-fitting.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/rubber-hose-fitting12a2b.jpg</video:thumbnail_loc>
<video:title>Rubber Hose Fitting</video:title>
<video:description>This rubber hose fitting is a hose-end connector used on rubber air or water lines when the hose needs a barbed stem, clamp position, threaded end, or angled outlet.
The stem enters the hose bore and gives the rubber wall a holding surface.
The clamp position is kept straight so the band can press evenly.
Threaded and hex-end versions connect the hose assembly to equipment ports.
Straight, elbow, insert, and threaded types can be supplied by hose size and end style.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090910331103e1f.mp4</video:content_loc>
<video:publication_date>2026-09-09T10:33:57+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/industrial-components/rubber-tube-connectors/rubber-fittings-tubing.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/rubber-fittings-tubing2a136.jpg</video:thumbnail_loc>
<video:title>Rubber Fittings Tubing</video:title>
<video:description>This rubber fittings tubing is a molded rubber connector used between flexible tube ends, equipment outlets, or short low-pressure tube routes that need a sleeve, reducer, elbow, or shaped adapter.
The molded body works as the connector, not as a loose cover over a fitting.
The bore can be straight, stepped, angled, or copied from the removed part.
Tube ends sit inside the rubber body with defined insertion length.
Straight sleeves, reducer sleeves, elbow connectors, and custom adapters can be supplied by drawing or sample.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260909103441a4e18.mp4</video:content_loc>
<video:publication_date>2026-09-09T10:35:17+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/industrial-components/silicone-tube-connectors/silicone-tube-adapter.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/silicone-tube-adapter7ed74.jpg</video:thumbnail_loc>
<video:title>Silicone Tube Adapter</video:title>
<video:description>This silicone tube adapter is made for short connections where a straight tube would be overstretched between two different port diameters.
Larger and smaller ends are molded into one sleeve.
Each end keeps its own seating length before the diameter changes.
Clamp land or shoulder details can follow the installed sample.
Repeat batches keep the same stopping position.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260909104152e688f.mp4</video:content_loc>
<video:publication_date>2026-09-09T10:42:22+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/industrial-components/pvc-tube-connectors/rubber-pvc-pipe-joiner.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/rubber-pvc-pipe-joiner4a011.jpg</video:thumbnail_loc>
<video:title>Rubber Pvc Pipe Joiner</video:title>
<video:description>This rubber pvc pipe joiner is a clamp-on rubber sleeve for PVC pipe ends when a rigid socket fitting is difficult to install in a fixed pipe route.
The sleeve closes the joint from outside without spreading the pipe line apart.
Both pipe ends get seating length inside the rubber body.
Clamp bands tighten on stable sleeve areas instead of the sleeve mouth.
Pipe OD, sleeve length, and wall build can follow an approved sample or drawing.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090910462303393.mp4</video:content_loc>
<video:publication_date>2026-09-09T10:46:31+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-kits/o-ring-kits/master-o-ring-kit.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/master-o-ring-kit2e1cc.jpg</video:thumbnail_loc>
<video:title>Master O Ring Kit</video:title>
<video:description>This master o ring kit keeps common O-ring sizes in one divided repair box for workshop benches, service carts, spare-parts rooms, and distributor stock.
Pocket layout keeps daily repair sizes visible before smaller special kits are opened.
Clean molded rings and stable section height support repeated replacement work.
Fast-moving pockets can be refilled by size, compound, hardness, and buyer code.
Supplied as a repair assortment box, not loose single seal stock.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260909105705a00f2.mp4</video:content_loc>
<video:publication_date>2026-09-09T10:57:23+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-kits/o-ring-kits/hnbr-o-ring-kit.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/hnbr-o-ring-kitb9595.jpg</video:thumbnail_loc>
<video:title>Hnbr O Ring Kit</video:title>
<video:description>This HNBR repair seal box keeps selected O-ring sizes apart from daily NBR trays and FKM boxes for material-specific service stock.
The case mark shows HNBR before the tray is opened on a bench or service cart.
Each pocket carries one service size in the ordered compound and hardness.
Used pockets show which AC, compressor, or automotive sizes move first.
Old tray photos and buyer labels can be kept when the layout is already used.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/202609091104487caf3.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:05:18+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-kits/hydraulic-seal-kits/hydraulic-cylinder-packing-kits.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/hydraulic-cylinder-packing-kitse3525.jpg</video:thumbnail_loc>
<video:title>Hydraulic Cylinder Packing Kits</video:title>
<video:description>This cylinder seal service pack is prepared for repair jobs where rod-side, piston-side, and gland-area parts need to be packed in one ordered set.
Rod, piston, and gland parts are separated before the kit reaches the repair bench.
Small O-rings, backup rings, and wipers can be marked by repair position.
Old seals, photos, drawings, or packing lists can be used to rebuild the set.
Bag order and buyer codes can follow the approved repair record.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260909110635fe71d.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:07:08+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-kits/pneumatic-cylinder-seal-kits/seal-kit-air-cylinder.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/seal-kit-air-cylinderd624d.jpg</video:thumbnail_loc>
<video:title>Seal Kit Air Cylinder</video:title>
<video:description>Aftermarket pneumatic cylinder repair pack for rebuilding opened air cylinders from old labels, removed seals, previous packs, or confirmed size notes.
Repair groups follow the parts removed from the cylinder.
Piston, rod, cover, cushion, and small seals stay separated when confirmed.
Old labels, samples, or previous packs can guide repeat supply.
Bag wording and buyer codes can match the team's repair habit.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260909111640f5974.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:17:10+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-kits/excavator-seal-kit/excavator-cylinder-seal-kits.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/excavator-cylinder-seal-kits6b56d.jpg</video:thumbnail_loc>
<video:title>Excavator Cylinder Seal Kits</video:title>
<video:description>Repair sets for excavator hydraulic cylinders, with each set prepared for the cylinder named on the order.
Clean moulded edges and even sections.
Rod, piston, and guide profiles stay flat.
Cylinder position or assembly number should be listed.
Mixed orders are packed separately.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090911222716887.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:23:08+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-gaskets/ptfe-gaskets/soft-ptfe-gasket.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/soft-ptfe-gasket02a31.jpg</video:thumbnail_loc>
<video:title>Soft Ptfe Gasket</video:title>
<video:description>A compressible PTFE sealing part that closes shallow flange marks more easily than a dense flat gasket.
Even softness helps the whole face compress together.
Clean-cut edges keep narrow sections intact.
One-piece construction avoids overlapped tape joints.
Finished flange shapes arrive ready to fit.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090911273821ac3.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:27:41+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-gaskets/flange-gaskets/steam-flange-gaskets.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/steam-flange-gaskets4dd3a.jpg</video:thumbnail_loc>
<video:title>Steam Flange Gaskets</video:title>
<video:description>Nonmetallic flange gaskets cut from steam-service sheet, with a firm sealing band and a clean inner edge.
Dense sheet body stays together under heat.
Clean bores limit loose fibres at the flow edge.
Even thickness keeps the full ring in contact.
Finished profiles are packed flat.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/202609091136358d111.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:37:18+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-gaskets/spiral-wound-gaskets/cgi-spiral-wound-gasket.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/cgi-spiral-wound-gasket7f9bd.jpg</video:thumbnail_loc>
<video:title>Cgi Spiral Wound Gasket</video:title>
<video:description>A three-part flange gasket with an inner ring, wound sealing element, and outer centering ring assembled as one finished unit.
Inner and outer rings keep the winding contained.
Flat centering rings settle cleanly between the studs.
The winding stays level without loose outer turns.
Ring markings remain readable after packing.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/202609091138191fb36.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:38:37+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-gaskets/spiral-wound-gaskets/spiral-metallic-gasket.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/spiral-metallic-gasket1feaa.jpg</video:thumbnail_loc>
<video:title>Spiral Metallic Gasket</video:title>
<video:description>A semi-metallic flange gasket with a firm wound body, secured terminal turns, and filler held evenly between the metal layers.
Tight outer turns stay closed when the ring is lifted.
Filler does not rise above the metal strip.
The closing area stays level with the sealing face.
Roundness is protected during packing.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260909113920cb91d.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:39:48+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-gaskets/spiral-wound-gaskets/gasket-spiral-wound-ss316.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/gasket-spiral-wound-ss3161cfd6.jpg</video:thumbnail_loc>
<video:title>Gasket Spiral Wound Ss316</video:title>
<video:description>A flange gasket with SS316 in the wound sealing element, clear component marking, and separate material identification for every ring.
SS316 is used in the sealing winding itself.
Filler stays contained between the formed metal turns.
Inner- and outer-ring materials remain separately listed.
The finished ring stays round and level through packing.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260909114329c557b.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:43:56+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-gaskets/spiral-wound-gaskets/spiral-seal.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/spiral-sealc90e6.jpg</video:thumbnail_loc>
<video:title>Spiral Seal</video:title>
<video:description>A winding-only gasket made to the groove dimensions, with reinforced edges and no outer guide ring extending beyond the sealing recess.
The finished outside diameter follows the groove.
Reinforced edge turns keep the ring together.
The sealing body stays flat during packing.
Metal and filler remain separately identified.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/20260909114447d5c96.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:45:14+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
<url>
<loc>https://www.vanserrubber.com/seal-gaskets/cylinder-head-gaskets/engine-cylinder-head-gasket-set.html</loc>
<video:video>
<video:thumbnail_loc>https://www.vanserrubber.com/uploads/47757/small/engine-cylinder-head-gasket-setcadb1.jpg</video:thumbnail_loc>
<video:title>Engine Cylinder Head Gasket Set</video:title>
<video:description>A matched cylinder-head repair kit built around the main head gasket, with related gaskets and seals used during the same repair.
Main head gasket follows the engine-specific combustion and fluid passages.
Intake, exhaust, cover, and small seals are included where required.
Large and small sealing parts belong to the same engine version.
Kit contents can follow the original part number or an approved sample set.</video:description>
<video:content_loc>https://www.vanserrubber.com/uploads/47757/video/2026090911470753c6f.mp4</video:content_loc>
<video:publication_date>2026-09-09T11:47:33+08:00</video:publication_date>
<video:family_friendly>yes</video:family_friendly>
<video:live>no</video:live>
</video:video>
</url>
</urlset>